Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.

TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before use again.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.

TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before use again.

Neoprene Queen Adhesive is a fast-curing, thick, black glue. Its premium quality and properties make it perfect for repairing wetsuit and drysuit damage that regularly occurs over time with regular use. This nifty adhesive will enable you to make easy and durable repairs to rips, roles, leaks and split seams on wetsuit and drysuit material. 

To use, apply to both edges of a rip and bond firmly together for 20 seconds. Within 5 minutes, it should be touch dry and you will be ready to go back in the water!

An essential tool for divers, anglers, surfers, body boarders, kite surfers and sailors.

Perfect for casual water sports enthusiasts as well as professional triathletes who want to stand out.

Rainy's Popper PAINT is specially formulated acrylic paint. Flexible after painted.

Thins and cleans up with water. Recommented when painting any foam surface.

Distributed in glass bottles (.05 oz) with a wide lid.

Clear Coat is highly recommented as a first and final coat when applying colors - letting each coat dry first.

Paste floatant for Dubbing.

Devcon 5-Minute Epoxy Gel is a super fast, epoxy liquid formulated for high speed bonding. This is an excellent substitute for High Build epoxy, for use with fishscale powder or glitter. It works wonderfully even with thin films and low temperatures, forms a clear, strong bond in just 5 minutes, and reaches full strength in just one hour. The gel formula is thick, so it won’t sag or drip, and it will fill gaps up to ¼″.

Packaged in a convenient syringe dispenser, so you can mix only what you will use in the next couple of minutes.

28.4 gram (1 oz.) package.

Effectively relieves the itch and pain of bites from mosquitos, black flies, horse flies, fire ants, bees, wasps, plants and jellyfish.

Reel Lube contains Teflon® to reduce friction and prolong gear life. Reel Oil is a special ATZ® silicote oil formulated to penetrate and leave a lubricating film to keep your reel operating smooth, fast and quiet.

A portion of prepared natural wax for waxing threads to give them extra protection.

12 gr. per packet.

ATZ epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener.
Hardens in five minutes, fully cures in 25 minutes.
Used for saltwater streamers and other epoxy-based flies.
Dries clear

Net Vol:  25ml

A flexible clear coating for flies and feathers.

Simply coat with flue glue allow to dry and you have a welded wing or hackle point that looks the same but will not split.

Developed by Dave Whitlock the Flexament Thinner is used to thin tying cement.

Both feature a vapor-resistant cap and are available in a 1-oz. bottle.

Made in USA.